51.2V 200Ah LiFePO4 battery with 10.24kWh capacity. Wall mount design for home solar storage in US, Canada, Mexico, Caribbean. 6000 cycles. CAN/RS485 BMS. IP65 optional.
| Grade A LiFePO4 | 6000 Cycles, 15+ Years |
| 10.24kWh | Whole Home Backup Ready |
| Wall Mount | Zero Floor Space, Saves Garage Area |
| Parallel Ready | Expand to 150kWh+ |
| Wide Temp Range | -20°C to 55°C – Heat Ready for TX, FL, PR, MX |
| IP65 Optional | Outdoor Installation Ready |
This 51.2V 200Ah LiFePO4 battery delivers 10.24kWh of reliable energy storage in a sleek wall mount design – perfect for homeowners across the US, Canada, Mexico, and the Caribbean who are tired of rolling blackouts, hurricane outages, and rising electricity bills.
Hurricanes in Florida, heatwaves in Texas, blackouts in California, unstable grids in Mexico and the Caribbean – your home needs backup power that’s always ready. This battery hangs securely on your wall, taking zero floor space. No more tripping over floor batteries in your garage.
From the freezing winters of Canada (-20°C operation) to the scorching summers of Puerto Rico and Texas (55°C operation), this Grade A LiFePO4 battery delivers 6000+ cycles – that’s over 15 years of daily use.Smart BMS protects against overcharge, overheating, and short circuits.
CAN and RS485 ports work instantly with Growatt, Deye, Victron, Sol-Ark, EG4, and all 48V hybrid inverters. Parallel up to 8 units for 80kWh+ total capacity.
CE certified. UN38.3 approved for shipping. 10-year warranty.
| Parameter | Specification |
| Nominal Voltage | 51.2V |
| Nominal Capacity | 200Ah |
| Usable Energy | 10.24kWh |
| Cell Type | Grade A LiFePO4 |
| Cycle Life | 6000+ cycles @ 80% DoD |
| Design Life | 15+ years |
| Standard Charge Current | 50-100A |
| Max Charge Current | 100-200A |
| Standard Discharge Current | 50-100A |
| Max Discharge Current | 100-140A |
| Charge Voltage | 57.6V |
| Discharge Cut-off | 43.2V |
| Communication | CAN / RS485 / RS232 |
| Parallel | Up to 8-16 units (80-160kWh) |
| Display | LCD (select models) |
| Working Temp (Charge) | 0°C ~ 55°C |
| Working Temp (Discharge) | -20°C ~ 55°C |
| Protection Rating | IP20 (indoor) / IP65 (outdoor optional) |
| Dimensions (W×H×D) | 500-600 × 750-950 × 150-250 mm |
| Weight | 85-125 kg |
| Certifications | CE, UN38.3, IEC62619, UL1973 (select models) |
8KW Split Phase Hybrid Inverter – 48V to 120/240V UL Certified with 500V MPPT for Solar System
Solvic 3.3KW/6.3KW 120V Hybrid Solar Inverter | 500V PV Input | UL Certified for US & Latin America
Solvic 1000W-6000W Low Frequency Split Phase Inverter – 12V/24V/48V to 120/240V, Single or Split Phase Selectable, 3x Surge for Motor Start
For essential loads (2 fridges, lights, internet, TV, fans ~500-700W total), this battery provides 14-20 hours of backup. For a whole home including AC? A 3-ton AC alone draws 3.5kW – you'd get about 3 hours. We recommend pairing with solar panels to recharge daily during extended outages. Many customers in Puerto Rico and Florida use this battery + 3-5kW solar to run indefinitely after hurricanes.
Yes. LiFePO4 chemistry handles heat up to 55°C (131°F) during discharge. Unlike lead-acid batteries that fail in 2-3 hot summers, our Grade A cells are thermally stable. For best lifespan, avoid direct sunlight and ensure 4-6 inches clearance for airflow. For outdoor installation (carport, patio), choose the IP65 version – it's rain and dust proof .
The wall mount bracket is DIY-friendly. However, for electrical connections to your inverter and main panel, we strongly recommend a licensed electrician. Local codes vary – in the US, permits may be needed; in Latin America, a qualified local electrician is affordable ($100-200). We provide remote installation support via WhatsApp with video calls.
Leave a message!
Leave a message!
