51.2V 100Ah 200Ah LiFePO4 rack battery. 10kWh per module, expandable to 614.4V 120kWh (12 modules). Modular HV system for commercial solar storage in US, Canada, Mexico
| Grade A LiFePO4 | 6000 Cycles, 15+ Years |
| 5-10kWh per Module | Expandable 20kWh to 120kWh |
| Rack Mount Design | 4 to 12 Modules for HV System (204.8V to 614.4V) |
| CAN & RS485 | Plug and Play with All HV Inverters |
| Modular Expandable | Add Modules Anytime, No Reprogramming |
| Wide Temp Range | 20°C to 55°C – Built for Americas Climate |
This 51.2V 100-200Ah LiFePO4 rack battery delivers 5/10kWh per module. Start with 20kWh (2 modules) and expand up to 120kWh (12 modules) with system voltage from 102.4V to 614.4V. Perfect for commercial solar storage, microgrids, telecom backup, and large-scale off-grid systems across the Americas.
Higher voltage means lower current, smaller cables, less heat, and better efficiency. For systems above 30kW, high voltage battery banks save thousands in copper wiring and installation costs.
From Canadian winters (-20°C operation) to Caribbean heat (55°C operation), this Grade A LiFePO4 system delivers 6000+ cycles at 80% DoD – over 15 years of reliable daily use. Smart BMS with CAN and RS485 communication works with all major HV hybrid inverters (Growatt, Deye, Victron, Sol-Ark, SMA).
Modules
100Ah Capacity
200Ah Capacity
System Voltage
Recommended Application
4
20 kWh
41 kWh
204.8 V
Small to Medium Commercial
5
26 kWh
51 kWh
256.0 V
Large Office
6
31 kWh
61 kWh
307.2 V
Retail / Small Factory
7
36 kWh
72 kWh
358.4 V
Medium Factory
8
41 kWh
82 kWh
409.6 V
EV Charging / Solar Farm
9
46 kWh
92 kWh
460.8 V
Medium Commercial ESS
10
51 kWh
102 kWh
512.0 V
Commercial / Microgrid
11
56 kWh
113 kWh
563.2 V
Industrial Storage
12
61 kWh
123 kWh
614.4 V
Max Configuration
| Parameter | 100Ah Module | 200Ah Module |
| Cell Type | Grade A LiFePO4 | Grade A LiFePO4 |
| Configuration | 1P16S | 2P16S |
| Nominal Voltage | 51.2V | 51.2V |
| Nominal Capacity | 100Ah | 200Ah |
| Gross Energy | 5.12 kWh | 10.24 kWh |
| Usable Energy (90% DoD) | 4.61 kWh | 9.22 kWh |
| Standard Charge / Discharge | 50A | 50A |
| Max Charge / Discharge | 100A | 100A |
| Charge Voltage | 57.6V | 57.6V |
| Discharge Cut-off | 43.2V | 43.2V |
| Cycle Life | 6000+ @ 80% DoD | 6000+ @ 80% DoD |
| Communication | CAN, RS485 | CAN, RS485 |
| Working Temp (Discharge) | -20°C ~ 55°C | -20°C ~ 55°C |
| Weight | ~45 kg | ~79 kg |
| Dimensions (W×H×D) | 565 × 770 × 80 mm | 565 × 770 × 165 mm |
| Max Series (12 modules) | 61.44 kWh / 614.4V | 122.88 kWh / 614.4V |
| Certifications | CE, UN38.3, MSDS | CE, UN38.3, MSDS |
8KW Split Phase Hybrid Inverter – 48V to 120/240V UL Certified with 500V MPPT for Solar System
Solvic 3.3KW/6.3KW 120V Hybrid Solar Inverter | 500V PV Input | UL Certified for US & Latin America
Solvic 1000W-6000W Low Frequency Split Phase Inverter – 12V/24V/48V to 120/240V, Single or Split Phase Selectable, 3x Surge for Motor Start
For essential loads (2 fridges, lights, internet, TV, fans ~500-700W total), this battery provides 14-20 hours of backup. For a whole home including AC? A 3-ton AC alone draws 3.5kW – you'd get about 3 hours. We recommend pairing with solar panels to recharge daily during extended outages. Many customers in Puerto Rico and Florida use this battery + 3-5kW solar to run indefinitely after hurricanes.
Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.
Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.Here is the answer.
Leave a message!
Leave a message!
